Saturday, August 17, 2019
The Usage Of A Bandgap Reference Voltage Engineering Essay
A bandgap mention electromotive force is an indispensable constituent of an parallel to digital converter.It is frequently used to provide a mention electromotive force which is compared with others voltages.The bandgap mention used in diverse applications is based on the thought of Hilbiler in 1964 [ 1 ] aÃâ ââ¬Å¡A bandgap mention electromotive force with low sensitiveness to temperature and supply electromotive force is normally required in parallel or digital circuits. Low electromotive force and low power are two of import design standards in both parallel and digital systems.It been expected that the whole electronics system will be operated down to a individual 1-V supply in near future.The bandgap mention ( BGR ) generators which can be operated under 1-V supply have been widely used in DRAM, falsh memories, analog-digital convertor ( ADC ) and assorted parallel devices.So far many techniques have been proposed to develop electromotive force or current mentions, which can be about independent to temperature and power supply voltage.The bandgap mention is the major design to supply a preciseness electromotive force mention with low sensitiveness to the temperature and the power supply.when CMOS engineerings enter the nano-scale epoch, The demand for battery operated portable equipments will increase.the supply electromotive force has been scaled down from 1.8V ( in 0.18à µm engineering ) to 1.2V ( in 0.13à µm engineering ) , and will drop to merely 0.9V in the following coevals engineering [ 2 ] .In CMOS engineering, the parasitic perpendicular bipolar junction ( BJT ) had been normally used to implement P-N junction of the bandgap reference.But the traditional CMOS bandgap mention circuits did non work in sub 1-V supply voltage.the ground, that the minimal supply electromotive force can non be lower than 1V is constrained by two factors, which is the bandgap electromotive force of around 1.25V in Si, which is exceeds 1V supply.The others factor is the low-tension design of the relative to absolute temperature current coevals cringle is limited by input common-mode electromotive force of the amplifier.These two limitions can be solved by utilizing the resistive subdivision methods, low threshold electromotive force ( or indigen ) device, BiCMOS procedure or DTMOS device.However, those attacks frequently require specialised procedure and word picture which addition fiction cost and procedure stairss. Reference electromotive force generators are required to be stabilized over procedure, electromotive force and temperature fluctuations and besides implemented without alteration of fiction process.The bandgap mention ( BGR ) is one of the most popular mention electromotive force generators that successfully achieve the requirements.regarding the generators, the demand for the low power and low electromotive force operation is strongly increasing the spread of the battery-operated portable applications.A bandgap mention electromotive force is an indispensable constituent of an analog-to-digital converterIt is frequently used to provide a mention electromotive force which is compared with others voltage. A bandgap mention electromotive force with low sensitiveness to temperature and supply electromotive force is normally required in parallel or digital circuits.there are several methods to recognize a temperature independent voltage.the base emitter junction used as a nucleus constitu ent of the bandgap mention is the most popular approach.the general bandgap mention electromotive force mention electromotive force is described by a additive combination of base-emitter electromotive force. Bandgap mention circuit is widely used to supply stable current and electromotive force mentions in parallel circuits every bit good as in assorted signal CMOS circuits.A stable mention circuit should be robust against temperature, power supply and procedure variations.Sub-1-V mention coevals has got importance due to scaling ensuing in shrinking of MOS dimensions and decrease of power supply to minimise power ingestion. owing to follow Moore ââ¬Ës Law, it has become needfully of import to diminish the power in the chip.This puts the restraint on the power dissipation of mention generators.the design of this bandgap besides see for low power operation..In traditional BGR circuit, bipolar transistors and one or more resistances are used.BJTs that are used in BGR are in parasitic signifier in CMOS.resistor occupy big country on the bit and hence addition the cost.on bit tolerance of resistances vary from 20 % to 30 % .So, we have to replaced these constituents with MOS transistors t o better public presentation of BGR and to salvage bit area.The combination of different runing parts like subthreshold, additive and impregnation of MOS suppresses the temperature dependance of electromotive force mention.Aims:To set up a dc electromotive force or current that is independent of the supply and procedure and has a chiseled behaviour with temperature. To plan the BGR that independently to temperature and low noise and low electromotive force To plan bandgap mention that can be successfully operated with sub 1-V supply in standard 0.35 CMOS procedure without particular procedure engineering.Problem statementWhen CMOS technologies enter the nano-scales epoch, the demand for battery-operated portable equipments will increase.The supply electromotive force has been scaled down from 1.8V ( in 0.18 m engineering ) to 1.2V ( in 0.13 engineering ) and will drop to merely 0.9V in the following engineering [ 2 ] .in CMOS engineering, the parasitic perpendicular bipolar junction transistor ( BJT ) had been used to implement the high preciseness bandgap electromotive force references.However, the convential BGR generates a 1.25V mention voltage.Its fixed end product electromotive force limited the supply electromotive force and non suited for sub 1-V supply volateg operation.The ground why the conventional CMOS bandgap mention did non work in close 1-V supply voltage.One is that the bandgap end product electromotive force is about 1 .25V [ 3 ] , which exceeds 1-V supply.The others is that the low temperature electromotive force design of the relative to absolute temperature current coevals cringle is limited by the input common-mode electromotive force of the amplifier.These two restrictions can be solved by utilizing the resistive subdivision method [ 4 ] , low threshold electromotive force device [ 5 ] , BiCMOS procedure or DTMOST [ 6 ] . But, those attacks frequently require specialised procedure and word picture which can increase fiction cost and procedure step.However, the bandgap mention working in low supply electromotive force has a higher temperature coeeficient than that of traditional bandgap reference.This resulted in the development of new temperature compensated techniques such as quadratic temperature compensation [ 7 ] , exponential temperature compensation [ 8 ] , piecewise additive curvature rectification [ 9 ] and resistance temperature compensation [ 10 ] .To implement these advanced mathem atical maps with high truth, the development of the low electromotive force bandgap construction requires precision matching of current mirrors or a pre-regulated supply electromotive force, cascade current mirror [ 11 ] , and pre-regulated circuit are good methods to work out this problem.but the minimal supply electromotive force is tradeoff.Scope of work:A typical CMOS execution of a bandgap mention is shown in Fig. 1. The end product mention electromotive force VREF of the traditional bandgap mention circuit can be written as: Equation 1 trad bgr.bmp Figure 1: Traditional/conventional BGR circuit in CMOS engineering where A1 and A2 is the emitter countries of Q1 and Q2, and VT is thermic electromotive force. The 2nd term in ( 1 ) is relative to the absolute temperature ( PTAT ) , which is used to call off the negative temperature coefficient of VEB. Hence, if a proper ration of resistances is kept, an end product electromotive force with lowsensitivity to the temperature can be obtained. In general, the VREF is about 1.25 V, so that the conventional bandgap mention circuit can non be used in low electromotive force application, such as 1 V. Mention electromotive forces and/or currents with small dependance to temperature turn out utile in many parallel circuits. As many procedure parametric quantities vary with temperature, if a mention is temperature-independent, it is normally processindependent every bit good. If two measures with opposite temperature coefficient are added with proper weighting, the attendant measure theoretically exhibits zero temperature coefficient. The construct of the new proposed bandgap mention is that the two electromotive forces ( which are relative to VEB and VT ) are generated by merely one feedback cringle. The two-stage operational amplifier with p-channel input is used in thisnew proposed bandgap mention. The new proposed bandgap mention is shown in Fig. 2, which uses the resistive subdivision R1a, R1b, R2a and R2b to cut down the input common-mode electromotive force of the amplifier.The dimensions of PMOS devices M1 and M2 are the same.The opposition of R1a and R2a is the same, and th e resistanceof R1b and R2b is the same. Following the KCL at the nodesof V1 and V2 in Fig. 2, the mention electromotive force can be expressed as New Picture.bmp Equation 2 Where and.According to equation below: ) /R4 We can expressed equation 2.The point of Vref-conv is indistinguishable to the conventional mention electromotive force in equation ( 1 ) .In order to accomplish sub 1-V operation, the ratio of R1b/ ( R1a+R1b ) is used to scale down the mention electromotive force level.Therefore, the minimal supply electromotive force of the new proposed BGR can be efficaciously reduced to merely. The new proposed BGR mentions can operated under bomber 1V.The whole complete circuit to recognize the proposed bomber 1V BGR is shown below: New Picture ( 1 ) .bmp Figure 2: Complete circuit for new proposed Sub1V So, from the comparing above, I can clearly cognize what I will make on my ain undertaking, what my range of work.From this, i ââ¬Ëll go on the new proposed BGR design that already done but I will seek to minimise the supply electromotive force, temperature independent and noise consequence as possible so the BGR will successfully operated in sub 1-V.
Charles Dickensââ¬â¢ ââ¬ÅA Tale of Two Citiesââ¬Â Essay
Charles Dickensââ¬â¢ novel, A Tale of Two Cites, is a very rich text. The characters, plot, and writing style are all complex and multifaceted. However, one of the least studied and important part of this novel is the chapter titles and even the proposed novel titles. These titles reveal and expose more about the text, like symbolism and irony that would have otherwise been missed. Dickensââ¬â¢ chapter and proposed novel titles are instrumental in revealing symbolism and irony in the book. Dickensââ¬â¢ chapter titles reveal underlying symbolism in the novel. One of most symbolic of all the chapter titles is that of Book II, chapter five: ââ¬Å"The Jackal.â⬠The ââ¬Å"jackalâ⬠is the nickname given to Sydney Carton, and it holds a great symbolic meaning. The jackal is a loner, a scavenger, a low-life in the hierarchy. Yet, the jackal is an incredibly adept at what it does; it is an excellent scavenger and hunter. Carton fits the chapter title perfectly. When we first see Carton, he is in the courtroom staring idly at the ceiling. He is unattached, just as he is later unattached from the Revolution and the rift between the Manettes and the Defarges, his manner in court is said to be ââ¬Å"so careless as to be almost insolent.â⬠Carton is continually a man set apart, just like the lonesome jackal. Carton, it must be noted, is one of the only main characters to not have a connection with the Revolution in some way. The ââ¬Ëjackalââ¬â¢ and chapter title are a direct double of the ââ¬Ëlionââ¬â¢, or Mr. Stryver. Stryver, though he lacks ââ¬Å"that faculty of extracting the essence from a heap of statementsâ⬠, is a highly successful man. Dickens notes that ââ¬Å"easy and strong customâ⬠is what prevents the ââ¬Å"thought of emerging from the state of the lionââ¬â¢s jackal.â⬠A second chapter title that exhibits symbolism is that of Book II, chapter fifteen: ââ¬Å"Knitting.â⬠In a literal sense, Madam Defarge knits a registry of thoseà marked to be killed in the revolution. When one of the Jacques questions the registry of stitches, M. Defarge assures him that ââ¬Å"it will always be as plain to her as the sun.â⬠At this point in the novel, it is clear that Madame Defarge possesses an anger and fury that knows no boundary. The knitting symbolizes the Defargeââ¬â¢s and the entirety of the Revolutionââ¬â¢s hatred of aristocracy. Dickens tells the reader that the ââ¬Å"fingers of the knitting women were vicious.â⬠Additionally, we are also told that ââ¬Å"if the bony fingers had been still, the stomachs would have more famine-pinched.â⬠Thus, Dickens turns a casual and seemingly harmless pastime into a sinister and menacing symbol of hatred. Dickens turns this chapter title into a recurring symbol in Book III, chapter fourteen: ââ¬Å"The Knitting Done,â⬠in which Darnay is waiting to die, and Madame Defarge herself is killed by Mrs. Pross, bringing an end to her knitting. A third and final symbolic chapter title is that of Book III, chapter three: ââ¬Å"The Shadow.â⬠The symbol presented by this chapter title is somewhat similar to the ââ¬Ëknittingââ¬â¢ symbol. However, while ââ¬Ëknittingââ¬â¢ represent the hatred of French aristocracy, the ââ¬Ëshadowââ¬â¢ represents the power that Madame Defarge and the revolution wield. When, Madame Defarge visits Lucie, the shadow she casts upon her and her child is said to be ââ¬Å"so threatening and darkâ⬠that Lucie ââ¬Å"instinctively kneeled on the ground beside her, and held her to her breast.â⬠For Dickens, the shadow is the fierceness and the inescapable momentum that the revolution has. Hence, Madame Defarge, in the same chapter, mocks Lucie by asking if ââ¬Å"the trouble of one wife and mother would be much to us now?â⬠Dickensââ¬â¢ chapter titles exude symbolism. Dickensââ¬â¢ chapter titles are also very ironic. In Book II, chapter four: ââ¬Å"Congratulatory,â⬠Darnay has just won his treason case. Doctor Manatte, Lucie, Lorry, and Stryver all congratulate Darnay on the successful trial. After the group disperses, Carton invites Darnay, his look-alike, for a drink at the bar. At the bar, Carton asks Darnay if Darnay thinks that Carton likes him. When Darnay is unsure, Carton tells him: ââ¬Å"I donââ¬â¢t think I do.â⬠It is ironic that the title of the chapter is ââ¬Å"Congratulatoryâ⬠, yet Carton spends a large part of the chapter expelling the reasons why he doesnââ¬â¢t like Darnay, revealing Dickenââ¬â¢s ironic humor. In Book II, chapter twelve: ââ¬Å"The Fellow of No Delicacy,â⬠Stryver tries to win Lucieââ¬â¢s hand inà marriage. This chapter is ironic because Stryver has no delicacy at all, contrary to what the chapter title might have you thinking. The chapter reveals that Stryver is arrogant and dimwitted. Stryver decides to marry to place a ââ¬Å"magnanimous bestowal of good fortuneâ⬠upon Lucie, revealing his arrogant ways. Later, Stryver, speaking to Lorry, says ââ¬Å"the young lady at present in question is a mincing fool,â⬠insulting Lucie. Simply put, Stryver has no delicacy at all, illuminating Dickensââ¬â¢ tongue in cheek humor. A third and final chapter title that exhibits irony is the Book II, chapter 14: ââ¬Å"The Honest Tradesman.â⬠This chapter centers on Jerry Cruncher and his activities as a self-labeled ââ¬Å"Resurrection Man.â⬠Obviously, the irony is between the ââ¬Å"honest tradesmanâ⬠and Jerryââ¬â¢s midnight excursions in which he digs up buried bodies. Dickensââ¬â¢ chapter titles disclose a very ironic and satirical humor. While Dickensââ¬â¢ chapter titles are very appealing to examine, his proposed titles for the novel are very interesting to study, as well. One such title was ââ¬Å"Buried Alive.â⬠This proposed title definitely carries symbolic value. Buried alive, or solitary confinement, is certainly one of the major themes in the novel. Dr. Manett spends eighteen years in solitary confinement, and Darnay spends four years imprisoned in the Bastille, too. Dickens gives a frightening account of being buried alive. As the Defarges enter the Bastille, the tumult comes to them ââ¬Å"in a dull, subdued way,â⬠the sky could only ââ¬Å"by stooping low and looking up.â⬠Perhaps Dickensââ¬â¢ near obsession with imprisonment could be due to the child labor he faced as he grew up, working in various factories to try to repay his fatherââ¬â¢s debt. A second proposed title was ââ¬Å"Memory Carton.â⬠Memory plays a fascinating and symbolic role in this novel. When Dr. Manette learns Darnayââ¬â¢s true name, the memory sends him into shock once again. Reflecting on his nine-day, shoemaking fit: the doctor says, ââ¬Å"Remembrance that was the first cause of the malady. Some intense associations of a most distressing nature were vividly recalled, I think.â⬠Later on in the novel, memory plays a big role in Carton. The memory of his love for Lucie, his promise to ââ¬Å"give my life to keep a life you love beside you,â⬠causes him to make the ultimate sacrifice. Dickensââ¬â¢ proposed novel titles reveal are very symbolic. Dickensââ¬â¢ chapter titles and proposed novel titles reveal many underlying parts of the novel. Both symbolism and ironic humor are concealed within his clever and witty titles. Dickensââ¬â¢ tongue in cheek humor might have derived from all the hardships that he faced in life, from the child labor to the divorces and family issues. Either way, he is a fascinating author, and A Tale of Two Cities is a great piece of literature. Works Consulted: Dickens, Charles. A Tale of Two Cities. Edited and with an introduction and notes by Richard Maxwell. London: Penguin Classics (2003) ISBN 978-0-141-43960-0 Orwell, George. ââ¬Å"Charles Dickensâ⬠. In A Collection of Essays. New York: Harcourt Brace Jovanovich (1946) ISBN 0-15-618600-4
Friday, August 16, 2019
Comparing Ancient and Classical Art Essay
Ancient and classical art comes in all different shapes and sizes of visual experience. In this paper we explore into the making and design of two unique architectural buildings, Stonehenge and The Great Stupa at Sanchi. These two fascinating buildings were built in different eras from BCE to CE and yet have many similarities, and as well carry distinct differences between the cultural values and the purpose they were intended. This paper will also focus on the areaââ¬â¢s region and the functions these two artifacts carry in our culture in the present day. The Stonehenge is located in Wiltshire, England. The Stonehenge is made up of many different size stones. The heal stone alone is 16ft tall, weighing 35 tons. When the sun sets, this stone casts a shadow towards the main circle of stones. There are two smaller stones known as the ââ¬Å"Avenueâ⬠, which are lined up and these also cast a shadow in the direction of the circle. There are 2 stones that follow the ââ¬Å"Avenueâ⬠, that stand next to each other, almost like an entrance to the outer circle of stones. The two stones are known as the ââ¬Å"slaughter stoneâ⬠. The slaughter stones were believed to be a place of human sacrifice. The main circle of stones are known as ââ¬Å"The Sarsen Circleâ⬠. These stones are set in a circle and supported by tenon joints. The circles of stones are also circled by the outer bank, which is a 330ft in diameter and is the oldest construction in the area. In the middle of the circle consists of five trilithons. These stand 22ft above ground and are 8ft below ground level. The weight of these stones is 50 tons. In the inner circle is also the ââ¬Å"Altar Stoneâ⬠, this is made of smooth, green sand stone, which is known as one of the most recognizable stones at Stonehenge. The main circle of stones, have smaller stones inside, which also form an inner circle and these are known as ââ¬Å"Bluestone Circleâ⬠. The Stonehenge was believe to be built in 2750-1500 BCE. The stupa sits on a hilltop in central India. The stupa consists of four gateways and each gateway has decorations that tell a story in regards to the life of Buddha. The shape of the stupa is dome shaped and is surrounded by a fence to limit distractions during the meditation period. The dome has an upper and lower pathway. The lower path represents the path of life and the upper representing enlightenment. The top of the dome has an umbrella, which is a tower of three discs, smaller at the top and bigger at the bottom. All three discs represent something different, from top to bottom, Buddha, his teachings and the community of Buddhist. The Stupa was built over 400 years, but most of its completion was in 15CE. The Stonehenge World Heritage spans ten miles around the famous site of Stonehenge. The region is also known as the Salisbury Plains as the location is grassy and flat. This Neolithic artwork in the United Kingdom is a famous destination for many individuals around the world. Unlike the region in which Stonehenge is located, the Great Stupa at Sanchi rests upon a hilltop in central India. Sanchi, which stands for small village is located in the Raisen district of the Madhya Pradesh (ââ¬Å"Sanchi City Travel Guideâ⬠, n.d.). The surroundings of the Stupa is calm and restful and it is surrounded by hills, trees, and other types of vegetation. Many individuals still visit this religious site along with other temples and stupas located in this region. Scientists believe that it took over 600 individuals to create the famous Stonehenge monuments. This was because some of the rocks weighted some 50 tons. Great teamwork by the Neolithic people of Britain is attributed to the creation of Stonehenge. The great emperor Ashoka of Maurya is the creator of the Great Stupa at Sanchi although this site was rediscovered in 1818 by a British officer. It was then that the site was reconstructed to the condition that is in today. It is believed that that Ashoka created this and many other stupa in the area to divide relics of Buddha after his passing (ââ¬Å"Stupaâ⬠, 2013). Their designs are circular, which is the first thing that viewers notice. With the huge stones used to build the Stonehenge and the complexity of The Greatà Stupa at Sanchi, it definitely would have taken teamwork to get the jobs done. As the Closer Look states, ââ¬Å"The stupa was built over a period of 400 yearsâ⬠(Closer look n.d.) and the Stonehenge took hundreds of peopleââ¬â¢s cooperation to build. These many groups of people probably valued socialism and teamwork in their cultures. With their hard work they completed something bigger than themselves which probably made the activity that more valua ble and special. The Closer look suggests that the Stonehenge was a burial ground due to the discoveries of human remains. According to Mike Parker-Pearson, ââ¬Å"Villagers would have transported their dead down an avenue leading to the River Avon, then journeyed downstream, in a ritual symbolizing the passage to the afterlife, finally arriving at an avenue leading up to Stonehenge from the river.â⬠(Closer Look n.d.) As for The Great Stupa at Sanchi, it represented Buddhaââ¬â¢s life and was also a place for meditation. The Stonehenge and The Great Stupa at Sanchi have one obvious similarity; they both are made of stone and they took many of years to complete. These two works of art are very different from one another. The Stonehenge purpose is unknown still to this day. There are guesses and assumptions but there is no known fact about what it was used for. The Great Stupa at Sanchi was used for meditation purposes and where pilgrims would try to achieve harmony with Buddha and his life pat h. The Stonehenge was seen a great place to socialize but on the other hand, The Great Stupa at Sanchi was used by people to be peaceful, quiet, and calm. This great place is a relic of Buddha, and is used to worship him, as well as other Buddhist Gods. These two historical places, architecture could not be any more different. The Stonehenge is made of many separate stone setups that make up a circle and The Great Stupa at Sanchi is a dome shape to represent the earth. These two works of art, Great Stupa at Sanchi and the Stonehenge, both still have a function in todayââ¬â¢s culture. They both are not physically used by everyone like they once were, but people are still able to see them in person. They are now tourist attractions which help others understand what they are, how they were, utilized, and more about each culture in that era. In conclusion, when we compare the architectural values and the visual description of each artwork, we find that they both hold a special meaning to the time and era of itsà making. It can range from religious interpretation to the never ending mysteries that these attractions hold. It is all in the eye of the beholder. Whatever their original designs were meant for, whether it is human sacrifice or to leave a piece of art that would last through the ages, it is undoubtedly part of the power that ancient and classical art hold. So knowing the designer, the builders, and geographic locations of these pieces all play a part in their signature, it still leaves the world debating on whether it is even human design or that of a much more advanced race. References Closer look. (n.d.). Retrieved from http://closerlook.pearsoncmg.com/view.php?type=closerlook&id=653# Sanchi City Travel Guide. (n.d.). Retrieved from http://www.hoparoundindia.com/madhya- pradesh/city-guides/sanchi.aspx Stupa. (2013). Retrieved from http://www.ancient.eu/stupa/ University of Phoenix.(2010). A World of Art, Ch.17. Retrieved from University of Phoenix, ARTS230 website.
Thursday, August 15, 2019
Experiment Essay
The primary focus of experiment 4 was to teach a student the basic solubility rules of salts in aqueous solutions. After developing and using a scheme for the qualitative analysis of three cations in an aqueous mixture, a student would use a centrifuge to identify, precipitate, and separate the three ions in the mixture. After becoming familiar with all three cations, the student would use the scheme again to identify at least two of the cations in an unknown solution. In order to begin the separation process, HCl is added to the mixture of cations to form the precipitates and separate the chlorides of Ag+, Pb2+, and HG22+. It is important not to add too much HCl because an excess would form the soluble complexes of AgCl and PbCl2. After the HCl is added, it is centrifuged to form a solid precipitate that contains all three cations and separate them from the supernatant liquid. Finally, another drop of HCl is added to test for completeness of precipitation and centrifuged again if the solution remains incomplete. To separate the lead (II) ion from the sample of solution, it must be separated from the insoluble Hg2Cl2 and AgCL salts by dissolving it in hot water. Once it has been dissolved from the other two cations, it is centrifuged and the liquid is decanted into another test tube. Once in the other test tube, a drop of 6.0 M acetic acid and two drops of 1.0 M K2CrO4 is added to the saved liquid. If the lead (II) cation is present, a yellow precipitate forms and ensures the presence of that cation. When testing my unknown solution, the lead (II) ion was not present in my solution. To further separate the cations, 1.0 mL of 6 M NH3 is added to the saved precipitate. After adding the ammonia, the mixture is centrifuged and the liquid is once again decanted into another test tube. If a gray or black precipitate forms, this proves the presence of Hg22+. The mercury (I) ion was present in my unknown. Finally, separating the silver ions from the sample solution mixture is accomplished in the prior step when the mercury ion is centrifuged. In order to test for the presence of silver ions, 1 mL of 6M HNO3 is added to the solution from the prior step. The silver precipitates in this acidic solution. If a white precipitate appears, silver is present in the solution. The presence of a white precipitate in the solution proves that there were silver ions in my unknown. By following the scheme for the qualitative analysis, it was simple to separate and test for the presence of the target cations. It was critical to correctly label every one of the liquids to ensure the correct reactions. No other difficulties prevented success in the experiment, but performing the experiment several times would further reinforce the outcome of the experiment.
Wednesday, August 14, 2019
Causes and Effects of Cancer
In the human body, cells are constantly going through the cell cycle. An Important step of the cell cycle Is called mitosis, In which the cell (referred to as the parent cell) undergoes a series of steps that lead to the formation of two daughter cells. This process only occurs In somatic cells, which are any nongamete cells. Gametes are haploid (containing only half of a full chromosome set, 23 chromosomes vs. a diploid's 46) cells in the form of sperm (males) or ovum (females).Some areas of the body undergo very little mitotic division at all, such as muscles and nervous tissue. Other areas undergo mitotic division in response to a growth factor, which is a signal to cells of a specific area to begin mitosis. This growth factor is released into the extracellular fluid in certain portions of the body in response to four basic stimuli: growth, repair, asexual reproduction, and regeneration. In humans, growth and repair are the prevalent stimuli. Growth dictates the maturation of an o rganism during a specific period of timeâ⬠known as puberty in humans.Repair, on the other and, occurs when an organism sustains an injury such as a laceration, in which mitotic division occurs to create a blood clot to seal the wound, and epithelial cells undergo the process as well to recreate the skin cells that were destroyed. To control the rate ot mitotic cell division, the body uses growth signals and antigrowth signals. cancerous cells are those that Ignore antgrowth signals, and can continue to replicate without growth factors. After a certain amount of rnltotlc dlvlslons, the telomeres In cells shorten until there Is none, and programmed apoptosisâ⬠cell death â⬠occurs.Cancer cells elongate their telomeres, and so can also replicate almost indefinitely. When these cells start to build up, they form a mass called a tumor. Tumors can either be benign or malignant. Benign tumors on the skin have hair growth and clean edges, whereas malignant tumors do not and are cancerous. The condition can worsen if any cells from a malignant tumor detach and travel to other parts of the body through the circulatory or lymphatic systems. The tumor will then begin growing in the location where the cell ends up. nd can be fatal In certain organs like the liver or the brain, What makes these cells especially dangerous is ngiogenesis, in which the blood vessels near a tumor grow to increase the blood supply to that area, providing necessary nutrients and oxygen to the cancerous cells and depriving nearby healthy cells. Cancerous cells also divide more frequently because the length of time a cell spends in Interphaseâ⬠the ââ¬Å"inactiveâ⬠phaseâ⬠is shortened. This becomes even more dangerous when considering that less time is spent on replicating the DNA so the daughter cells are more likely to have chromosomal disorders. 3.The article presents new evidence and viewpoints regarding the formauon of malignant tumors and cells. At first, In the 90 s, It was elieved that cancer was ââ¬Å"the result of cumulative mutations that alter specific locations In a cell's DNA and thus change the particular proteins encoded by cancer- related genes at those spots. â⬠Of course It Is already clear that certain substances, such as tobacco, asbestos, and UV radiation, are common cancer-causers (carcinogens). wnat Is Delng aeoatea, nowever, Is wnat erect tnese suostances nave on cells that cause malignancy in the first placeâ⬠orâ⬠What makes these substances carcinogens?In regards to the DNA mutation theory, evidence stemmed from observations of tumor suppressors and oncogenes. These two genes inhibit a cells' ability to divide, and stimulate growth respectively. DNA mutations would either disable tumor suppressors, or ââ¬Å"permanently lock oncogenes into an active state. â⬠While still supported by a few in the field, disagree. ââ¬Å"No one questions that cancer is ultimately a disease of the DNA. â⬠There are, however, a substantial amount of other factors that have been observed to vary between normal and cancerous genes.Opponents of the dogma feel that ââ¬Å"Cancer is a consequence of a chaotic process, a combination of Murphys Law and Darwin's law; anything that can go wrong will, and n a competitive environment, the best adapted survive and prosper. â⬠Age is a significant risk factor for cancer, as it is for most diseases. The older you are, the more likely you are to be diagnosed with cancer. On hypothesis that differs from the cumulative-mutations theory says that there are five or six regulation systems that need to be affected in order for a cell to be malignant.These six ââ¬Å"special abilitiesâ⬠are: growth in the absence of growth signals, continued growth despite anti-growth signals, evasions apoptosis, ability to coopt blood vessels to branch off towards the mass, near-indefinite replications, and metastasis. Of the six, it is metastasis that provides the most di fficult aspect to counteract, as different drugs and treatment methods have to be utilized based on the region in which cancer is preset. For instance, chemotherapy is not very effective for bone cancer.Very few cells in a tumor have the ability to metastasize, however, once detected it is usually too late. ââ¬Å"The prominent paradigm for 25 years has been that tumors grow in spurts of mutation and expansion. â⬠Mutations affect genetic material in such a way that usual regulatory proteins are unable to be synthesized properly, or at all. Once mutated, cells then expand and replicate much faster than normal cells (explained in the background section). It is, however, much easier to permanently activate an oncogene than it is to suppress the tumor alleles (one mutation rather than two).It is, however, now believed that cancer is not Just caused from mutations to a few specific genes. If ââ¬Å"Just a small fraction of the cells in a tumor are responsible for its growth and met astasis,â⬠the ââ¬Å"cureâ⬠for cancer is much more easily attainable. Seeing as mitosis produces two genetically identical daughter cells, DNA mutations present in the arent cells should also be observable in both daughter cells. Most tumors are not actually masses of identical clones; instead, there is an ââ¬Å"amazing genetic diversity among their cells. While there are some commonly-mutated genes from cancer cell to cancer cell (like p53), ââ¬Å"most other cancer genes are changed in only a small fraction of cancer typesâ⬠¦ â⬠Aneuploidy is a term describing abnormalities in chromosomes. ââ¬Å"If you look at most solid tumors in adults, it looks like someone set Offa bomb in the nucleusâ⬠¦ there are big pieces of chromosomes hooked together and duplications or osses of whole chromosomes. â⬠The issue though, is that most cancer cells's genomes are unstable as wells as aneuploid, and so the new introduced problem is whether mutations or aneuploidy occurs first in a cancerous cell.One of the three plausible answers is the modified dogma. This states that some external or internal factor disables the genes needed for synthesizing and repairing DNA, resulting in an ty to correct mutatlons tnat occur. Anotner optlon Is ââ¬Å"early InstaDlllty,â⬠statlng that there are specific master genes required for a cell to divide, and these are silenced. Thus, when chromosomes replicate and mistakes occur, the daughter cells fail to get the correct number of type of chromosomes. As replication continues, so do the ââ¬Å"resultsâ⬠worsen.The last theory is the ââ¬Å"all-aneuploidy' theory, in which a cellular division error produced aneuploid daughter cells that have varying amounts of different genes. The specific genes that code for enzymes which correct DNA mutations are unable to be synthesized, and thus the DNA begins to fail and kill the aneuploid cells with it. 4. While on the longer side of the spectrum, Gibbs' article i s well-written, detailed, and incredibly informative. Above all, the article is also relevantâ⬠both to our current unit in AP Biology, and in the medical field.The article is about ten years old at this point, however, much, if not all, of the information described and provided is still highly accurate and in question today. While there have been numerous developments in the biotechnology fields specializing in treatment and detection of cancer, not many advancements have taken place in regards to identifying the reasons why certain substances are carcinogenic. Mitosis and meiosis are subjects that go hand in hand with cancer, as it is literally an ncontrolled amount of mitotic division, making the article easy to relate too.New terms such as oncogenes and tumor suppressors are well explained, and numerous links to previous material (such as protein synthesis and chromosomal disorders) can be made by any knowledgeable AP Biology student. Comprehension was not an issue whatsoeve r, and the article was wonderfully written as well as fascinating. That said, I would highly recommend the article to anyoneâ⬠AP Biology student or otherwise, as it is informative in layman's terms, as well as important in modern society.
Tuesday, August 13, 2019
Conflict Identification and Resolution Essay Example | Topics and Well Written Essays - 1000 words
Conflict Identification and Resolution - Essay Example The clinic has been sold to a new owner who decided to improve business efficiency and to increase sales. The newly appointed CEO has set the sales targets for the company and informed about these targets two categories of employees: sales and marketing department and doctors. Both sales department and doctors were expected to achieve the new sales targets, while doctors had to sell themselves, and marketers had to sell the clinicââ¬â¢s products and visits to doctors. The crux of the conflict was in an increasing confrontation between the sales department and doctors. On the one hand, doctors were blaming sales and marketing (S&M) department that they do not cope with their work as their work is to sell. On the other hand, marketing and sales department believed that doctors should be actively involved in sales process, as they were people who had direct access to the patients and the power of word of mouth was a good practice in healthcare sector. On the weekly meetings held by t he CEO and devoted to discussions and analysis of the sales progress the conflict between two parties (doctors and S&M) has been growing in result of mutual accusations and insults. It is also important to take into consideration the specific tough character of majority of doctors who often are tough people in result of the nature of their work. Doctors are special category of employees as they are used to make serious decisions quickly in order to save human live. Therefore, they donââ¬â¢t like when management or other employees do not make efficient decisions. The conflict described above is the intergroup conflict between S&M department and clinical department (doctors) (Deutsch & Coleman 2000). The major source of the conflict is obvious ââ¬â lack of proper communication between different departments. Effective communication is especially critical during quite a challenging time of changes (new owner and newly appointed CEO) in
Monday, August 12, 2019
Oil Exploration And Development Essay Example | Topics and Well Written Essays - 2000 words
Oil Exploration And Development - Essay Example Political, legal and economic conditions need to be researched in depth before deciding whether or not to join forces with the oil industry. Ruritania, considered a developing country, has been under the same dictatorship for over thirty years and their internal political asylum is very stable. However, neighboring countries that have Ruritania land-locked from large bodies of water, are not so predictable. Known as ââ¬Ëthe axis of evilââ¬â¢ by several peaceful governments, Urbania and Translavia border both sides of Ruritania, blocking export opportunities for the inland country. Creative negotiations will have to take place with one or both of these countries in order to work out land rights if a pipeline were considered. Intense study of oil exploration is a first step in realizing the right conditions for an oil trap. The right source rock and reservoir rock entrapment can only be done by an experienced team of geologists. The project/asset lifecycle that normally includes Field Development Planning, Conceptual/Feasibility, FEED, Detailed Design, Procurement, Construction Support and Commissioning can run into the tens or hundreds of billions of Dollars. Actual costs depend on such factors as the location of possible oil reserves, how large the oil field is expected to be, how detailed the exploration information must be and the type and structure of the rock below the ground.
Subscribe to:
Posts (Atom)